Welcome to the Volcon
Stag EV
Charging Portal
InCharge Energy, an ABB majority owned company has been selected by Volcon ePowersports to support Volcon dealers in supplying electric vehicle charging equipment, in preparation for certification as an approved Volcon EV dealer. Our history as an EV charging service equipment and infrastructure design, install and maintenance provider to General Motors dealers, GM Defense, GM Fleet and Cruise autonomous vehicles translates seamlessly to the Volcon platforms provided with GM technology.
What Does the EV Purchase and Installation Process Look Like?
1.
2.
3.
4.
5.
6.
Fill out the Contact Us form below.
Enter the number of chargers needed in the drop down box.
Click “submit” to enter your order.
Invoicing
InCharge will send an invoice verifying order, and request payment within 3-5 days. Once payment is received, your new chargers will ship. You can pay by ACH or company check. No credit cards will be accepted.
Chargers should arrive 7-10 days after receiving payment.
Electrical Installation
While waiting for your new Terra AC charger(s), contact your electrician to install a 240v line to allow them to hardwire the new charger in the service department and/or new vehicle set up area. We highly recommend ordering at least 2 chargers with the special Volcon discounted pricing, and have them installed in different departments for ease of moving vehicles and multiple units charging.
1. Fill out the Contact Us form below.
2. Enter the number of chargers needed in the drop box.
3. Click “submit” to enter your order.
4. Invoicing
InCharge will send an invoice verifying order, and request payment within 3-5 days. Once payment is received, your new chargers will ship. You can pay by ACH or company check. No credit cards will be accepted.
5. Chargers should arrive 7-10 days after receiving payment.
6. Electrical Installation
InCharge will send an invoice verifying order, and request payment within 3-5 days. Once payment is received, your new chargers will ship. You can pay by ACH or company check. No credit cards will be accepted.
Volcon Approved Options for Hardware
The InCharge recommended packages per Volcon/GM guidelines include a combination of Level 2 AC chargers, depending upon your anticipated sales volume. These higher powered units will enable your dealership to charge with a quicker turnaround, by offering a fast version of Level 2 AC charging.
1
Minimum Requirement
Terra AC 40a Wallbox
Level 2 Charger
2
Medium Volume Sales
Terra AC 40a Wallbox
Level 2 Charger
3
High Volume Sales
Terra AC 40a Wallbox
Level 2 Charger
FAQ
Frequently Asked Questions
What EV charging equipment do I need for my dealership?
The Terra AC 40a L2 Wall Box purchased from InCharge Energy on the previous page is the required equipment for your dealership to become compliant to receive your Stag allocation. A minimum of one charger is mandatory, however we strongly suggest you look at your allocation, and install enough units that will suffice future allocations. This 9.6kW Wall Box is a high end commercial unit that will charge the Stag at the max input rate set by Volcon.
Do I need an electrician to install the chargers?
It is highly recommended to set up an appointment with an electrician to verify your electrical panel is compatible to operate your new chargers. The Terra AC is a Level 2, 40 amp charger and comes shipped as a hard wire unit. Your electrician can install a 240v line to the specific location that best works for your service department. InCharge HIGHLY RECOMMENDS your electrician to hard wire the charger into a 240v line for safety.
Will I need software to operate my chargers?
Software is not required to run the Terra AC Wallbox, however one of the advantages of purchasing a high end commercial charger such as the Terra AC, is being able to install the InControl™ software package that allows you to monitor who is using your chargers, and to determine state of charge on the vehicle. Additionally, InControl can perform maintenance and trouble shooting 24/7 should you have problems charging. As you expand your dealership with other EV vehicles, InControl will help control utility costs. There is a monthly charge of $50.00 per month, or $600 per year to use InControl, should you decide to add. The InCharge Energy team can help with any questions you may have about the advantages of this great tool
What are the advantages to having the InControl software connected to my chargers?
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut tortor pretium viverra suspendisse potenti nullam ac tortor.
How long does it take to charge the STAG with this new equipment?
The battery capacity for the new Volcon Stag is 42kW. While charging times vary in certain conditions, the Stag has a max input charge rate of 7.2kW, so you can expect to fully charge the vehicle from 0 to100% in less than six hours. Keep in mind that you will most likely never charge from 0%, so charge times will be less, depending on the current state of charge before connecting.
Some of my employees are driving electric vehicles now, and I am thinking about adding additional chargers, and even a DC Fast charger. Can InCharge help me with this?
InCharge has installed thousands of EV Level 2 AC and DC Fast chargers throughout North America, and can absolutely consult with you on your best options, as well as provide information on design and even quotes for these upgrades.
What is the standard warranty on the EV charging equipment?
The equipment warranty is two years. InCharge offers an extended warranty that can provide additional coverage for up to five (5) years.
About InCharge
InCharge Energy, an EV infrastructure leader, brings innovative solutions to electrification. In-Charge was formed with the leadership and support of industry leaders who have over one hundred years of combined electric vehicle and charging experience, having deployed more than 20,000 charging stations. The world leader in eMobility, ABB, made a majority stake investment in InCharge in January of 2022. Our seasoned team has experience working with utilities, fleet management, OEMs, engineering and more. We provide scalable, turnkey, end-to-end commercial energy and infrastructure solutions, including planning, engineering, financing, installation, operations, and maintenance.
We offer a broad portfolio of charging stations including a variety of L2 and DCFCs, reliable manufacturing partners, preferred pricing, and certified EVSE installation kits. InCharge also offers its own proprietary end-to-end charger management platform designed expressly for fleet and charging application: InControl Software. InControl manages charging stations access control, usage data, remote management, and network operations. Our software provides load management to reduce fleet total cost of operations (TCO) and peak energy demand. InControl is built for fleets with security and reliability paramount as well as designed for scalability of fleets, facilities,
and vehicles.
Ready to Order Your Chargers?
Fill out form below to order your chargers.
(All Fields Required)
Get in Touch
If you have more questions and want to speak with a charging expert, we’re here for you.